Premium Drilling Oils

BTA Heller  offers its many years of experience with a standard complement of three Premium Deep Hole Drilling Oils.

BTA Heller Cut 1

The BTA HELLER CUT 1 is a moderate, to heavy duty, light viscosity oil. Sulfurized and chlorinated extreme pressure additives and unique lubricity additives provide hydrodynamic and polar lubrication. The BTA HELLER CUT 1 outperforms other cutting oils and is specifically designed for deep-hole drilling, gun drilling, ejector drilling, trepanning, and other difficult operations.  It is ideal for both ferrous and non-ferrous materials. BTA Heller Cut 1 is the first choice for drilling small diameter holes ranging from .055” – 1.500” diameters.
Typical Analysis:
Weight …………………..7.5 LB/ GL.
Flash Point………………>2500F degrees F (TCC Method)
Viscosity…………………. 65 SSU @ 100 F
Appearance…………….. Dark oil, light viscosity, slight sulfur odor

BTA Heller Cut 2

The BTA HELLER CUT 2 is a moderate, to heavy duty, light viscosity oil. Sulfurized and chlorinated extreme pressure additives and unique lubricity additives provide hydrodynamic and polar lubrication. The BTA HELLER CUT 2 outperforms other cutting oils and is specifically designed for deep-hole drilling, gun drilling, ejector drilling, trepanning, and other difficult operations. It is ideal for both ferrous and non-ferrous materials. BTA Heller Cut 2 is the first choice for drilling small to large diameter holes ranging from 1.00” – 8.000” diameters.
Typical Analysis:
Weight …………………..7.5 LB/ GL.
Flash Point………………>2500F degrees F (TCC Method)
Viscosity…………………. 70 SSU @ 100 F
Appearance…………….. Dark oil, light viscosity, slight sulfur odor

BTA Heller Cut 3

The BTA HELLER CUT 3 is a moderate to heavy duty, light viscosity oil non-chlorinated cutting oil. Sulfurized with extreme pressure additives and unique lubricity additives provide hydrodynamic and polar lubrication. The BTA HELLER CUT 3 outperforms other cutting oils and is specifically designed for deep-hole drilling, gun drilling, ejector drilling, trepanning, and other difficult operations.  It is ideal for both ferrous and non-ferrous materials. BTA Heller Cut 3 is the first choice for drilling small to large diameter holes ranging from .055” – 8.000” diameters where Chlorine cannot be used due to environmental issues.

Typical Analysis:
Weight …………………..7.5 LB/ GL.
Flash Point………………>2500F degrees F (TCC Method)
Viscosity…………………. 65 SSU @ 100 F
Appearance…………….. Dark oil, light viscosity, slight sulfur odor

Advantages:
EXCELLENT EP AND LUBRICITY ADDITIVES
LIGHT VISCOSITY
SUPERIOR CHIP REMOVAL
NO GUMMY RESIDUE
IMPROVED FINISH
EXCELLENT TOOL LIFE
PROVIDES EXCELLENT LUBRICATION TO MACHINE TOOL
OILY RESIDUE RESISTS RUST AND CORROSION
10 – 30% IMPROVED TOOL LIFE

Availability:
55 Gallon Drums
275 Gallon Totes
Tanker Truck